Does IB Lighting Ship Nationwide?

Yes. IB Lighting ships to all 50 states. Large items like generators and chandeliers ship via freight carriers with free freight insurance included on every order. Smaller items ship via UPS or FedEx Ground.

How Do I Choose the Right Size Chandelier for My Room?

To determine the ideal chandelier diameter, add the room's length and width in feet, then convert that number to inches. For example, a 14 x 16 foot room calls for a chandelier approximately 30 inches in diameter. Hanging height and ceiling height also factor into the selection.

What Is an Automatic Transfer Switch and How Does It Work?

An automatic transfer switch (ATS) monitors your utility power supply and automatically starts your standby generator when an outage is detected. Once utility power is restored, the ATS switches your home back to the grid and signals the generator to shut down, all without any manual action.

What Size Standby Generator Do I Need for My Home?

The right generator size depends on your home's square footage, the number of circuits you want to power, and your HVAC system requirements. Most homes need between 14kW and 26kW. A load calculation performed by a licensed electrician is the most reliable way to determine the correct size.

What Warranty Coverage Comes with Products from IB Lighting?

All products sold by IB Lighting include the full manufacturer warranty. Warranty terms vary by brand and product type. Generac, Kohler, and Cummins generators typically carry 5-year limited warranties. Chandelier and lighting warranties vary by manufacturer.

What Wire Size Do I Need for a 200 Amp Service?

A 200-amp residential service typically requires 2/0 AWG copper conductors or 4/0 AWG aluminum conductors for the service entrance cable. Always verify requirements with your local electrical code and a licensed electrician, as factors like distance, conduit type, and ambient temperature can affect sizing.

Does IB Lighting Offer Technical Support Before and After Purchase?

Yes. IB Lighting provides expert technical support at every stage, from product selection and sizing to post-purchase installation guidance. Our team is available by phone at (800) 674-9019 to answer questions and ensure you get the right products for your project.

How Do I Place a Large or Custom Order with IB Lighting?

For large orders, contractor pricing, or custom configurations, contact IB Lighting directly at (800) 674-9019 or through our contact page. Our team will prepare a detailed quote with any applicable volume pricing and confirm lead times.

How Much Does It Cost to Install a Whole-House Generator?

Whole-house generator installation typically costs between $3,000 and $6,000 for labor alone, on top of the equipment cost. Total project costs vary based on generator size, fuel type, local permit requirements, and site preparation needs.

What Is the Difference Between Crystal and Glass Chandeliers?

Crystal chandeliers use precision-cut leaded or lead-free crystal that produces vivid light refraction and rainbow prisms. Glass chandeliers use standard or art glass that offers a softer, more diffused light. Crystal is typically more expensive and delivers greater sparkle and brilliance.

What Is the Difference Between THHN and Romex Wire?

THHN is a single-conductor wire designed for use inside conduit. Romex (NM-B) is a multi-conductor cable with an outer jacket designed for indoor residential wiring run through framing. The key difference is that THHN requires conduit protection while Romex does not when used in approved locations.

What Size Transfer Switch Do I Need for My Generator?

Your transfer switch must match your electrical panel's amperage rating. Most homes have a 200A service panel and need a 200A transfer switch. The switch must also be compatible with your generator's brand and output capacity. Always verify compatibility before purchasing.

Can I Install a Transfer Switch Myself or Do I Need an Electrician?

Transfer switch installation requires a licensed electrician in virtually all jurisdictions. The work involves connections to your main electrical service panel and must comply with NEC Article 702 and local building codes. A permit and inspection are typically required.

How Do I Calculate the Right Wire Gauge for My Circuit?

Wire gauge is determined by the circuit's amperage rating and the distance of the wire run. For standard residential circuits, 14 AWG supports 15-amp circuits and 12 AWG supports 20-amp circuits. Longer runs may require a larger gauge to compensate for voltage drop.

How Do I Clean and Maintain a Crystal Chandelier?

Regular dusting with a soft microfiber cloth or feather duster keeps crystal chandeliers looking their best. Deep cleaning involves spraying each crystal with a dedicated chandelier cleaning solution or a mixture of isopropyl alcohol and distilled water, then allowing them to air dry.

Natural Gas vs. Propane Generators: Which Fuel Type Is Better?

Natural gas generators offer unlimited fuel from your existing utility line, while propane generators work well in areas without natural gas service. The best choice depends on fuel availability at your location, local utility reliability, and your budget.

What Is IB Lighting's Return Policy?

IB Lighting accepts returns on unused, unopened products in their original packaging. Returns must be initiated within 30 days of delivery. Certain items like custom-order products may not be eligible for return. Contact us at (800) 674-9019 to initiate a return.

Why Is the Price Not Shown on Some Products?

Some manufacturers, including Generac, enforce Minimum Advertised Price (MAP) policies that prevent retailers from displaying prices below a set amount on their websites. For these products, the final price is shown securely in your shopping cart.

Can I Buy Directly from IB Lighting as a Homeowner?

Absolutely. IB Lighting sells directly to homeowners, contractors, and businesses alike. You do not need to be a trade professional to purchase from us. Every customer receives the same expert support and competitive pricing.

Can I Use LED Bulbs in My Chandelier?

Yes. LED bulbs are fully compatible with most chandeliers and offer significant energy savings, longer lifespan, and less heat output than incandescent bulbs. Choose LED bulbs with a warm color temperature (2700K) and a candelabra (E12) base for the best results in luxury fixtures.

How Often Should a Standby Generator Be Serviced?

Standby generators should be professionally serviced at least once per year. Oil and filter changes are typically needed every 200 running hours or annually, whichever comes first. Regular weekly exercise cycles and visual inspections between service visits help maintain reliability.

What Does "Stranded" vs. "Solid" Wire Mean?

Solid wire consists of a single metal conductor, while stranded wire is made up of multiple thin wires twisted together. Solid wire is standard for permanent in-wall residential wiring. Stranded wire is more flexible and easier to pull through long conduit runs.

What Does the Generac Generator Warranty Cover?

Generac standby generators come with a 5-year limited warranty covering defects in materials and workmanship. Coverage includes the engine, alternator, and control panel. The warranty requires the unit to be installed by a qualified technician and maintained according to the recommended service schedule. Extended warranties up to 10 years are available for purchase.

What Is the Difference Between a Manual and Automatic Transfer Switch?

A manual transfer switch requires you to physically flip a lever to switch between utility and generator power. An automatic transfer switch (ATS) detects the outage and performs the transfer without any human intervention, also starting and stopping the generator automatically.

Are Generator and Transfer Switch Kits Worth Buying Together?

Yes. Purchasing a matched generator and transfer switch kit ensures full compatibility, simplifies ordering, and often provides better value than buying components separately. Kits include everything your installer needs for a complete system.

Is Copper or Aluminum Wire Better for Residential Wiring?

Copper is the preferred conductor for residential branch circuit wiring due to its superior conductivity, smaller size, and easier termination. Aluminum is commonly used for service entrance cables and large feeder circuits where its lower cost provides significant savings.

What Are the Best Standby Generator Brands?

The leading standby generator brands in the United States include Generac, Kohler, Cummins, and Briggs & Stratton. Each brand offers distinct advantages in terms of power output, build quality, warranty coverage, and price points.

What Chandelier Style Works Best for a Modern Home?

Modern homes pair well with chandeliers featuring clean geometric lines, minimalist metal frames, sputnik designs, linear suspension shapes, or contemporary crystal fixtures with sleek silhouettes. Finishes like brushed nickel, matte black, and polished chrome complement modern interiors.

What Is the IB Lighting Return and Exchange Policy?

IB Lighting accepts returns and exchanges on most products within 30 days of delivery. Items must be in original, unused condition with all packaging and documentation. Generators and large equipment returns may be subject to a restocking fee and return shipping costs. Contact our team at (800) 674-9019 before initiating any return.

Why Buy Electrical Supplies Online from IB Lighting?

IB Lighting is a family-owned electrical supply company that ships generators, lighting, wire, and electrical equipment nationwide with free freight insurance on every order. As authorized dealers for Generac, Kohler, and Cummins, we offer manufacturer warranty protection, expert product support by phone at (800) 674-9019, and competitive pricing on thousands of products.

How Do I Choose Between Indoor and Outdoor Rated Electrical Wire?

Outdoor and wet-location wiring requires cable or conductors rated for moisture exposure, such as UF-B (underground feeder) cable or THWN-rated individual conductors in weatherproof conduit. Standard NM-B (Romex) is only approved for dry, indoor locations.

How Does Generator Shipping and Delivery Work?

Generators ship via LTL freight carrier on a pallet to your home or business. IB Lighting includes free freight insurance on every order. The freight company contacts you to schedule a delivery appointment. Upon delivery, inspect the shipment before signing. Standard transit is 3 to 10 business days depending on your location.

How Long Can a Standby Generator Run Continuously?

Natural gas standby generators can run indefinitely as long as the gas supply is maintained. Propane generators are limited by tank size. Most residential generators are designed for continuous operation during extended outages, with recommended maintenance intervals every 24 to 48 hours of continuous use.

How Much Does a Generator Transfer Switch Kit Cost?

Generator transfer switch kit prices vary by brand, generator size, and transfer switch amperage. Complete kits from Generac, Kohler, and Cummins include the generator, matching automatic transfer switch, and installation hardware. Contact IB Lighting at (800) 674-9019 for current kit pricing.

What Are the Best Chandeliers for High Ceilings?

High ceilings (10 feet and above) call for larger chandeliers with vertical presence. Multi-tier crystal chandeliers, cascading pendant designs, and grand entry fixtures in the 36-inch to 60-inch range work best. The bottom of the fixture should hang no lower than 7 feet from the floor in walkways.

Do I Need a Permit to Install a Standby Generator?

Yes. Most municipalities require both an electrical permit (for the transfer switch and wiring) and a building or mechanical permit (for the generator installation and fuel connection). Your licensed installer should handle the permit application and inspection scheduling.

Do I Need a Transfer Switch for a Portable Generator?

Yes. A transfer switch is required by the National Electrical Code whenever a generator is connected to your home's electrical panel. For portable generators, a manual transfer switch provides safe, code-compliant operation and eliminates the risk of backfeed that can electrocute utility workers.

How Do I Buy Electrical Wire in Bulk?

IB Lighting sells electrical wire in bulk quantities by the foot, in 250-foot, 500-foot, and 1,000-foot spools. Bulk pricing is available for large orders. Contact us at (800) 674-9019 for custom cut lengths, contractor pricing, and current availability on all wire types and gauges.

How Do I Choose a Chandelier for My Dining Room Table?

Your dining room chandelier should be one-half to two-thirds the width of your table, hang 30 to 36 inches above the table surface, and complement both the room style and table shape. Round tables pair well with round fixtures, while rectangular tables work best with linear or oval chandeliers.

How Do I Choose the Right Chandelier for My Foyer or Entryway?

A foyer chandelier should be proportional to the entry space, with a diameter equal to the width of the foyer in feet multiplied by 2 to 2.5 (converted to inches). In a two-story foyer, the chandelier should hang with its center at approximately half the total ceiling height and its bottom at least 7 feet from the floor.

How Loud Is a Standby Generator?

Most modern residential standby generators operate at 60 to 70 decibels measured from 23 feet away, comparable to a normal conversation or a central air conditioning unit. Noise levels vary by brand, model, and enclosure design. Quieter models are available from Cummins, Kohler, and other manufacturers.

What Is a 200 Amp Transfer Switch and Do I Need One?

A 200-amp transfer switch is a whole-house automatic transfer switch that connects between your utility service and your entire 200-amp electrical panel. It allows a standby generator to power every circuit in your home without load management or circuit selection. Most homes built since the 1990s have 200-amp service, making this the most common residential transfer switch size.

What Is the Difference Between 10 Gauge and 12 Gauge Wire?

12 AWG wire is rated for 20-amp circuits and is the standard for kitchen outlets, bathrooms, and general-purpose 20A branch circuits. 10 AWG wire is rated for 30-amp circuits and is used for dedicated appliance circuits like dryers, water heaters, and air conditioners. The lower the gauge number, the thicker the wire and the higher the ampacity.

What Is a Load Center Transfer Switch vs. a Whole House Transfer Switch?

A load center transfer switch powers only selected circuits (typically 8 to 16) and is paired with smaller generators. A whole house transfer switch powers your entire electrical panel and every circuit in your home. Load center switches cost less and work with smaller generators. Whole house switches provide complete coverage with no compromises.

What Is a Modern Farmhouse Chandelier and How Do I Choose One?

A modern farmhouse chandelier blends rustic warmth with clean, contemporary lines. Key features include natural materials like wood and wrought iron, simple geometric shapes, exposed bulbs, and finishes like weathered wood, matte black, or brushed nickel. They work in dining rooms, kitchens, and entryways.

What Wire Size Do I Need for a Sub Panel?

Sub panel wire size depends on the sub panel amperage and the distance from the main panel. A 60-amp sub panel typically needs 6 AWG copper or 4 AWG aluminum. A 100-amp sub panel needs 3 AWG copper or 1 AWG aluminum. Longer runs may require larger wire to compensate for voltage drop.

Whole House Generator vs. Portable Generator: Which One Should I Buy?

A whole house standby generator starts automatically during outages, powers your entire home, and runs on natural gas or propane. A portable generator requires manual setup, powers only a few circuits, and runs on gasoline. For reliable, hands-free backup power, a standby generator is the better long-term investment.

How Much Electricity Does a Chandelier Use?

A chandelier with LED bulbs uses approximately 25 to 100 watts total, costing roughly $3 to $12 per year to operate at average U.S. electricity rates. A traditional chandelier with incandescent bulbs uses 200 to 600 watts, costing $24 to $72 per year. Switching to LED bulbs reduces chandelier energy consumption by 80% or more.

What Is the Best Generator for Hurricane Season?

The best generators for hurricane season are permanently installed standby units that start automatically and run on natural gas or propane. Brands like Generac, Kohler, and Cummins offer weather-resistant enclosures designed to operate through severe storms without manual intervention.

What Wire Size Do I Need for a 30 Amp Breaker?

A 30-amp breaker requires a minimum of 10 AWG copper wire or 8 AWG aluminum wire. This applies to standard residential circuits at typical distances. For wire runs exceeding 100 feet, upsizing to 8 AWG copper is recommended to compensate for voltage drop. Always use wire rated for the installation environment (NM-B for indoor, UF-B for direct burial, THHN in conduit).

Expert Advice & Frequently Asked Questions

Find trusted answers from the IB Lighting team on generators, transfer switches, luxury lighting, and electrical supplies. Our experts are here to help you make confident purchasing decisions.

All Topics Electrical Wires & Cables (77) Luxury Chandeliers & Lighting (14) Ordering & Shipping (6) Standby Generators (108) Transfer Switches (9) Warranty & Support (8)

Electrical Wires & Cables

What Wire Do I Need for Landscape Lighting? Low Voltage and Line Voltage Guide

Most residential landscape lighting systems use 12/2 low-voltage direct burial wire (not standard NM-B or UF-B) connected to a 12-volt transformer plugged into a GFCI outdoor outlet. For line-voltage landscape...

Read Full Answer

Electrical Wires & Cables

What Wire Do I Need for a Ceiling Fan? With and Without Remote Control

A ceiling fan replacing an existing light fixture on a single-switch circuit uses the existing 14/2 NM-B wiring. A new ceiling fan installation with a separate wall switch for the...

Read Full Answer

Standby Generators

What Size Transfer Switch Do I Need for a Generac Generator?

Most whole-house Generac installations use a 200-amp automatic transfer switch (ATS) that matches the typical 200-amp residential electrical service. A 200-amp ATS passes the entire home panel through to the...

Read Full Answer

Standby Generators

Whole House Generator vs Essential Circuits Only: Which Is Right for You?

A whole-house generator powers every circuit in your home simultaneously during an outage. An essential-circuits approach uses a smaller generator paired with a load-managed transfer switch to power only selected...

Read Full Answer

Standby Generators

Generac Generator Overload: What It Means and How to Fix It

A Generac generator overload occurs when the total electrical demand connected to the generator exceeds its rated output capacity. The generator responds by displaying fault code 2100, tripping the main...

Read Full Answer

Standby Generators

Is a Standby Generator Safe? Carbon Monoxide Risk and Safety Guide

A properly installed Generac standby generator is safe when installed outdoors according to manufacturer specifications and local code requirements. Standby generators must never be installed in garages, basements, or enclosed...

Read Full Answer

Standby Generators

Best Generator for a Home Office: Powering Remote Work During Outages

For home office use, a Generac 18kW to 22kW standby generator is the recommended choice because it powers the entire home including the HVAC that maintains a productive work environment,...

Read Full Answer

Standby Generators

How Loud Is a Generac Generator? Noise Levels and Ordinance Compliance

Generac Guardian air-cooled standby generators operate at approximately 64 to 67 decibels (dB) at 23 feet under load, which is comparable to a normal conversation at close range or a...

Read Full Answer

Standby Generators

Can a Generator Prevent Basement Flooding During a Storm Outage?

Yes. A standby generator keeps your sump pump running during power outages, which is precisely when heavy rain and rising groundwater create the greatest flood risk. Power outages caused by...

Read Full Answer

Standby Generators

Whole House Generator vs Home Battery Backup: Generac vs Powerwall Compared

A whole-house Generac generator provides unlimited runtime from natural gas or propane, covering every circuit in the home simultaneously during outages of any duration. A Tesla Powerwall or similar home...

Read Full Answer

Standby Generators

How Much Does Generac Generator Annual Service Cost? Maintenance Guide

Generac generator annual service by a licensed technician typically costs $150 to $300 depending on the model size and local labor rates. This service covers the oil and filter change,...

Read Full Answer

Standby Generators

Does a Standby Generator Add Value to Your Home? Resale and Appraisal Guide

Yes. A standby generator adds 3% to 5% to a home appraisal value according to real estate industry research, which translates to $12,000 to $20,000 in added value on a...

Read Full Answer

Standby Generators

What Is the Difference Between Surge Watts and Running Watts on a Generac Generator?

Running watts (also called rated watts) is the continuous power a Generac generator can deliver indefinitely. Surge watts (also called starting watts) is the higher burst of power the unit...

Read Full Answer

Standby Generators

What Is the Generac G-Force Engine and How Is It Different from a Standard Engine?

The Generac G-Force engine is a purpose-built single-cylinder or twin-cylinder overhead valve engine engineered specifically for stationary standby generator duty cycles, not adapted from automotive or lawn equipment designs. It...

Read Full Answer

Standby Generators

How Do I Read a Generac Generator Spec Sheet to Size the Right Model?

A Generac spec sheet lists three critical figures for sizing: rated (running) kW at both natural gas and LP fuel, surge/starting kW, and fuel consumption in cubic feet per hour...

Read Full Answer

Standby Generators

Can a Generac Standby Generator Be Installed on a Manufactured or Mobile Home?

Yes, a Generac standby generator can power a manufactured or mobile home, but the installation has specific requirements because manufactured homes use a different electrical service entry standard (HUD code)...

Read Full Answer

Standby Generators

What Is the Difference Between the Generac Guardian Series and the Generac Protector Series?

The Generac Guardian series is the air-cooled residential product line ranging from 10kW to 26kW, designed for single-family home standby use. The Generac Protector series is a liquid-cooled commercial and...

Read Full Answer

Standby Generators

Can a Condo or Townhouse Have a Standby Generator Installed?

Condo and townhouse standby generator installation is possible but requires HOA approval, a dedicated outdoor installation space on the property, individual utility gas service to the unit, and local building...

Read Full Answer

Standby Generators

How Long Does Generac Standby Generator Installation Take from Delivery to First Power?

A standard Generac standby generator installation takes one to three days from equipment delivery to first operational power, assuming permits are in hand and the mounting pad is cured. The...

Read Full Answer

Standby Generators

Should I Install Whole-Home Surge Protection with a Standby Generator?

Yes. A whole-home surge protector is strongly recommended alongside any standby generator installation because the transfer switch process introduces brief voltage transition events that can stress sensitive electronics. Whole-home surge...

Read Full Answer

Still Have Questions?

Our expert team is ready to help you find the right solution for your project. Call us or send a message for personalized assistance.

Call (800) 674-9019 Contact Us

24/7 Support

Worldwide

Expert Advice & Frequently Asked Questions

What Wire Do I Need for Landscape Lighting? Low Voltage and Line Voltage Guide

What Wire Do I Need for a Ceiling Fan? With and Without Remote Control

What Size Transfer Switch Do I Need for a Generac Generator?

Whole House Generator vs Essential Circuits Only: Which Is Right for You?

Generac Generator Overload: What It Means and How to Fix It

Is a Standby Generator Safe? Carbon Monoxide Risk and Safety Guide

Best Generator for a Home Office: Powering Remote Work During Outages

How Loud Is a Generac Generator? Noise Levels and Ordinance Compliance

Can a Generator Prevent Basement Flooding During a Storm Outage?

Whole House Generator vs Home Battery Backup: Generac vs Powerwall Compared

How Much Does Generac Generator Annual Service Cost? Maintenance Guide

Does a Standby Generator Add Value to Your Home? Resale and Appraisal Guide

What Is the Difference Between Surge Watts and Running Watts on a Generac Generator?

What Is the Generac G-Force Engine and How Is It Different from a Standard Engine?

How Do I Read a Generac Generator Spec Sheet to Size the Right Model?

Can a Generac Standby Generator Be Installed on a Manufactured or Mobile Home?

What Is the Difference Between the Generac Guardian Series and the Generac Protector Series?

Can a Condo or Townhouse Have a Standby Generator Installed?

How Long Does Generac Standby Generator Installation Take from Delivery to First Power?

Should I Install Whole-Home Surge Protection with a Standby Generator?

Still Have Questions?